A&D Weighing ML-50 User Manual

Page 36

MS-70 / MX-50 / MF-50 / ML-50

Store Parameters and Finish the Operation

14. Press the

ENTER

key to store the new parameters of

the measurement program to program number 3.
Pressing the key, the weighing mode is automatically
displayed.
When PROG 3 is recalled, the settings can be used.

To cancel the new parameters and return to the

weighing mode, press the

RESET

key.

Timer Mode

Refer to page 32 for Standard Mode, Automatic Mode or Manual Mode

This explanation uses the following parameters and sample displays of MX-50.

Common

Items

Program number.......................................... 4 ( PROG 4 )

Analysis mode ............................................. Timer mode (Symbol: U-t

)

Drying program

Heating pattern ....................Ramp drying (

)

Final drying temperature .....160°C

Ramp time............................5.0 minutes

Drying time...........................10.0 minutes

Measurement

unit ...............................................Moisture

content

Minimum scale value during measurement.. 0.01 %

Minimum scale value of gram display .......... 0.001 g

Sample quantity ........................................... Approximately 5 g

Data memory function.................................. Not used

1. Display gram unit (of the weighing mode).

Select a Program Number to Edit the Measurement Program

2. Press

the

PROGRAM

key and press the

↓

↑

key to select a program number.

3. Press

the

ENTER

key to use the number.

4. The analyzer displays

end

and returns to the

weighing mode.

Caution

If the data memory function is active, the data
memory number (MEM) is displayed in place of the
program number (PROG).

% MOIST

PROG 1

0.000

PROG "4

end

PROG 4

0.000

Program number

Final drying temperature

50°C

Ramp time

Drying time

0.000

160°C

Gram display of
weighing mode

This manual is related to the following products:

MF-50 MX-50 MS-70