A&D Weighing ML-50 - Manual (Page 59)

MS-70 / MX-50 / MF-50 / ML-50 57
Calibration R Calibration R Calibration R Calibration Report eport eport eport Example for the Weighi Example for the Weighi Example for the Weighi Example for the Weighing Sensor Adapted to GLP, GMP and ISO ng Sensor Adapted to GLP, GMP and ISO ng Sensor Adapted to GLP, GMP and ISO ng Sensor Adapted to GLP, GMP and ISO
Preset the following parameters to print data to AD-8121B
Device Parameter Description
Interval
pU5e 1 1 Approx. two seconds interval in each line.
Analyzer
Output format
adapted to GLP,
GMP and ISO info 1
or
info 2 Calibration report is printed at "Calibration of the
Weighting Sensor" and "Calibration of Drying
Temperature".
AD-8121B MODE 3 Dump print (Received data is printed as it is)
1: Factory settings
........... A & D ........ Manufacture
MODEL ...... MX-50 ........ Model
S/N ..... K1234567 ........ Serial number
ID ....... LAB-123 ........ ID number
DATE .. 2004/09/30 ........ Date
TIME .... 13:57:24 ........ Time
CALIBRATED
.......... WEIGHT
CAL.WEIGHT
....... 20.000 .. g
SIGNATURE
........ Signature
- - - - - - - -
}
Calibration type
}
Calibration mass