A&D Weighing ML-50 User Manual
Page 31
MS-70 / MX-50 / MF-50 / ML-50
29
8.2.
8.2.
8.2.
8.2. Procedures to Store a Measurement Program
Procedures to Store a Measurement Program
Procedures to Store a Measurement Program
Procedures to Store a Measurement Program
8.2.1.
8.2.1.
8.2.1.
8.2.1. Standard Drying
Standard Drying
Standard Drying
Standard Drying
This explanation uses the following parameters and sample displays of MX-50.
Common
Items
Program number.......................................... 2 ( PROG 2 )
Drying program
Heating pattern ....................Standard drying (
)
Drying temperature..............160°C
Measurement
unit ...............................................Moisture
content
Minimum scale value during measurement.. 0.01 %
Minimum scale value of gram display .......... 0.001 g
Sample quantity ........................................... Approximately 5 g
Data memory function.................................. Not used
Items for Standard Mode
Analysis mode ............................................. Standard mode (Symbol: 5td
)
ACCURACY................................................. MID.
Analyzing mode to finish a measurement .........Automatic setting by ACCURACY
Items
for
Automatic
Mode
Analysis mode ............................................. Automatic mode (Symbol: U-a
)
Analyzing mode to finish measurement ............0.05 %/min
Items
for
Timer
Mode
Analysis mode ............................................. Timer mode (Symbol: U-t
)
Analyzing mode to finish measurement ............10 minutes
Items
for
Manual
Mode
Analysis mode ............................................. Manual mode (Symbol: U-m
)
1. Display the gram unit (of the weighing mode).
Select a Program Number to Edit the Measurement Program
Select a Program Number to Edit the Measurement Program
Select a Program Number to Edit the Measurement Program
Select a Program Number to Edit the Measurement Program
2. Press
the
PROGRAM
key and press the
↓
or
↑
key to select a program number.
3. Press
the
ENTER
key to use the number.
4. The analyzer displays
end
and returns to the
weighing mode.
Caution
If the data memory function is active, the data
memory number (MEM) is displayed in place of the
program number (PROG).
Drying temperature
Time
Drying temperature
Standard Mode, Automatic Mode, Manual Mode
Timer Mode
% MOIST
D
/W
/D
PROG 1
0.000
g
PROG "2
end
PROG 2
0.000
g
Program number