A&D Weighing ML-50 - Manual (Page 46)

MS-70 / MX-50 / MF-50 / ML-50 44
10.1. 10.1. 10.1. 10.1. Print samples Print samples Print samples Print samples
10.1.1. 10.1.1. 10.1.1. 10.1.1. Example To Print The Whole Data At One Time Example To Print The Whole Data At One Time Example To Print The Whole Data At One Time Example To Print The Whole Data At One Time
This example is printed items of "analyzer information", "measurement program",
"measurement data" and "signature space" at one time.
Preparation of Parameters Preparation of Parameters Preparation of Parameters Preparation of Parameters
Device Parameter Description
prt 0 1 When pressing the
ENTER key, the result is outputted.
prt 1
Data is outputted after measurement automatically.
5-d 0 1
Result is outputted only.
pU5e 1 1
Approx. two seconds interval in each line.
Analyzer
info 1 To print items at one time.
AD-8121B MODE 3 Dump print (Received data is printed as it is)
1: Factory settings
How To Print How To Print How To Print How To Print
Select a parameter to print "Measurement data". Refer to "14. Function Table"
prt 0 When pressing the
ENTER
key, the result is outputted.
prt 1 Data is outputted after measurement automatically.
Print Example Print Example Print Example Print Example
ььььььььььь A ü & ü D Factory
MODEL ьььььь MX-50 Product
S/N ььььь P1234567 Serial number
ID ььььььь LAB-123 ID number. 2
PROGRAM ьььь No. ü 1 PROG No.
MODE ьььь STANDARD
ьььььььььььь MID.
DRYING üü STANDARD
ьььььььььь 160 ьь C
UNIT ьььь MOIST/ ü W Measurement Unit
ь - ь - ь - ь - ь - ь - ь - ь -
INITIAL ü WEIGHT
ьььььььь 5.678 ьь g
FINAL ü WEIGTH
ьььььььь 4.567 ьь g
RESULT üü MOIST/ ü W
ьььььььь 19.57 ьь %
ANALYSIS ü TIME
ьььььььььь 6.7min
DATE üü 2004/09/30
TIME ьььь 12:34:56
REMARKS
ь - ь - ь - ь - ь - ь - ь - ь -
SIGNATURE
ь - ь - ь - ь - ь - ь - ь - ь -
2: ID number can be changed. Refer to "13.1. Identification Number (ID No.)"
}
Analysis mode. Refer to10.1.3
}
Drying program. Refer to 10.1.3
}
Wet weight
}
Dried weight
}
Measurement Result
}
Analysis time
}
Date. Refer to 10.1.3
}
Remarks. Refer to 10.1.3
}
Signature. Refer to 10.1.3
Analyzer information
Measurement
program
Measurement data
Signature space