6 sleep mode, Sleep mode -14, Sleep mode – KEYENCE BL-N90 Series User Manual
Page 54
3-14
3
D
e
scr
ipt
ions of
K
e
y Funct
ions
3-6
Sleep Mode
Set the BL-N90 to sleep mode in the following situations.
•
When not using the BL-N90 for a long period of time
Since the BL-N90 and the communication unit are continuously communicating wirelessly,
battery power is depleted even when the scanner is not reading a barcode. Enabling
sleep mode interrupts the wireless communication to the communication unit, thereby
saving battery power.
For details on power consumption, see
•
When changing the BL-N90 pairing (when using multiple BL-N90 and communication
units)
When changing the BL-N90 pairing, set the BL-N90 that is currently being used to sleep
mode.
For details about changing the pairing, see
z
Setting sleep mode
Press and hold "Trigger" for about 10 seconds.
After setting sleep mode, the following actions occur.
•
The buzzer sounds once long beep.
•
The blue LED on the communication unit lights up (wireless communication stopped).
z
Releasing sleep mode
To release the sleep mode, press "Trigger".
•
Wait 10 to 30 seconds until wireless communication starts.
•
Once wireless communication starts, the blue LED on the communication unit lights up.
1