KEYENCE BL-N90 Series - Manual (Page 22)

2-2
2
In
itia
l S
e
tup
2-1 Initial Setup
Before using the BL-N90, the following connections must be set up.
Performing these connections establishes the following communications, enabling the BL-
N90 for use.
• Connection between communication unit and computer:Wired communication
• Connection between BL-N90 and communication unit: Wireless communication (Bluetooth)
z
Initial setup
Note
After connecting the communication unit to the computer, be sure to charge
the BL-N90 before use.
1
Connect the power cable to the communication unit. ( page 2-3).
2
Connect the communication unit to your computer ( page 2-5).
3
Charge the BL-N90 ( page 2-11).
4 Establish a connection between the BL-N90 and the communication unit
( page 2-13).
Use the BL-N90 to read the BD address barcode attached to the
communication unit.
5 Initialize settings for the BL-N90 ( page 2-15).
Read the initialization barcode using the BL-N90.