KEYENCE BL-N90 Series - Manual (Page 35)

2-15
2
In
itia
l S
e
tup
2-6 Initializing the BL-N90
After establishing a connection between the BL-N90 and the communication unit, be sure to
initialize its configuration. This ensures that the scanner's configuration is initialized to match
the interface type of the communication unit.
Perform this operation in the following situations:
• Before using the BL-N90 for the first time
• After connecting the BL-N90 to a communication unit with a different communication
interface
Procedure
1
Press "Trigger" to activate the laser.
2
With the laser light about 100 mm from the page, scan the "Initialization" barcode below.
Once scanning of the "Initialization" barcode is complete, a beep will sound 3 times.
Note Scanning the initialization barcode initializes all of the settings.