KEYENCE SL-C Series - Manual (Page 14)

Chapter 1 Overview and Specifications
1-6
1
English ENGLISH
Common specifications
Environ-
mental
specifica-
tions
Material
Approved
standards
SL-C**F Operating distance
SL-C**H/SL-C**L Operating distance
Effective Aperture Angle
Response time
Light source
Operation form
Rating
Power voltage
Output type
Max. load current
OFF-state voltage
Protective structure
Ambient temperature
Storage ambient temperature
Relative humidity
Storage ambient humidity
Vibration
Shock
Main unit case
Upper case/Lower case
Overlay
EMC
EMS
EMI
Safety
OSSD
Output
Model
IP65 (IEC60529)
-10 °C to 55°C (No frost)
-10 °C to 60°C (No frost)
35 % to 85 %RH (No condensation)
35 % to 95 %
Ambient light White incandescent lamp: 5,000 rx or less Sunlight: 20,000rx or less
10 to 55 Hz, 0.7 mm compound amplitude, 20 sweeps each in X, Y, and Z directions
100 m/s 2 (Approx. 10G) 16ms pulse, in X, Y, Z directions 1,000 times each axis
Aluminum
Zinc die-cast
Polycarbonate
UL61496-1
FCC Part15 Class A
UL61496-1 ( type 4 ESPE)
UL61496-2 ( type 4 AOPD)
UL508
0.1 to 7 m
0.3 to 9 m
Max. ±2.5° (When operating distance is 3 m (9.84 ft.) or more)
15 ms* 1
Infrared LED (850 nm)
Turns on when light is received from all light beams (except when the blanking function is used)
24V DC ±10% (Ripple P-P 10% or less)
2 outputs each for PNP and NPN, Can be changed using the connector cable
300 mA* 2
2.5 V (with a cable length of 7 m (22.97 ft.))
Max. 100 µA* 3
0.47 µF (with a load resistance of 100 Ω)
Max. 2.5 Ω* 4
SL-C Series
0
100
200
300
(mA)
10 20 30 40 50 ( °C)
Leakage current
Max. capacitive load
Load wiring resistance
*1 OFF ➝ ON return time is 125 ms.
*2 Note the derating illustrated in the graph to the right when using PNP output.
*3 Includes when the SL-C Series power supply is OFF or when there is a disconnection in the power
supply line.
*4 In order to guarantee the proper operation of the SL-C safety circuit, the wiring resistance (excluding
dedicated cable wiring resistance) of the cabling connected to the hardware to which the OSSD output
and OSSD input are connected must be 2.5
Ω or less. For NPN output type cable, do not let wiring
resistance exceed a maximum of 1.0 Ω when the cable length is 15 m (49.21 ft.) or greater and the
load current is 200 mA or higher.