KEYENCE LS-Navigator - Manual (Page 51)

5
5-19 LS-Navigator-M-NO5-E
5-9
Transferring the Measurement Values to Excel
This section describes how to transfer measurement values that are read from the controller to
an Excel sheet.
1
Select [Start logging] from the [Excel
transfer] menu.
Or click on the [Excel transfer] icon on the
tool bar.
The [Logging] dialog appears.
2
Set the appropriate values for the transfer
items, the transferring sheet name, the
logging method, and any other required
parameters.
1
1
Set the logging method and logging
cycle (seconds).
From the pull-down menu, select
one of the following three types of
logging methods: [Click logging],
[Timer logging], and [Ext trig
logging].
When [Timer logging] is selected,
set [Logging cycle]. The cycle can
be set in 1 second intervals from 1
to 600 seconds.
When [Ext trig logging] is selected,
select [PRINTER1] or [PRINTER2]
for [D-MODE].
Select the items to transfer to the Excel sheet.
Items that can be transferred: Date (mdyhms),
OUT1, OUT2
Set the name of the Excel sheet to
transfer information to, and set the cell to
start writing. 3