KEYENCE LS-Navigator - Manual (Page 11)

1
1-3 LS-Navigator-M-NO1-E
1-1 LS-Navigator Overview
1. Reads and backs up the settings for all 16 programs on the controller (all of the parameters for limit settings,
calibration settings, area settings, and output settings) and the environment settings on the computer.
2. Restores the settings from the backup file created on the computer, in the event that the settings are erased
from the controller.
Note
There is no limit to the settings (parameters) that can be backed up or restored for the controller. Even parameters that
cannot be set by the program setting function can be backed up or restored.
The measurement values or judgment results that are measured on the controller can be monitored in real time on
the computer. The view can be selected from OUT1 display, OUT2 display, or simultaneous display of OUT1 and
OUT2. The value can be controlled by using auto-zero, timing, or the reset button.
Backup and restore functions for all controller settings
Measurement value monitoring and control function
Example of the measurement view menu