KEYENCE LS-Navigator - Manual (Page 37)

5
5-5 LS-Navigator-M-NO5-E
5-3
Setting and Changing Units
Set the same values for [Units] and [Minimum display unit] on LS-Navigator as for the controller
program.
1
Click on the [Change] button in the unit
setting area.
The [Unit setting] dialog appears.
2
Use the pull-down menu to set the values
for [Units] and [Minimum display unit] the
same as in the controller.
Reference
You can check the settings for [Units] and [Minimum
display unit] in the controller by looking at [Option]
settings in [Setting] mode.
See the “Minimum Display Unit” section in the
“User’s Manual” for each controller.
3
Click on the [OK] button to complete the
settings.
The set information appears in the unit setting
area.
1
3 2