KEYENCE LS-Navigator - Manual (Page 50)

5
LS-Navigator-M-NO5-E 5-18
5-8
Verifying and Changing the Program No.
This section describes how to change and verify the program No. that is read by the computer.
1
Select [Change program No. verification]
from the [Settings] menu.
The [Change program No. verification] dialog
appears.
Note
For the LS-7600/7500 series, the displayed value for
program No. is “00 to 15”.
For the LS-7000 series, the displayed value for
program No. is “0-9, A-F”.
Note
When switching the program number, [PANEL] must be set for [P-SELECT] in the environment settings for the controller.
For more details, see the “Details of Environment Settings” section in the “User’s Manual” for each controller.
1
To verify the program No. that is currently being read,
click on the [Check] button.
To change the program No., select the program No.
to read from the pull-down menu
and click on the [Run] button.