Specifications – KEYENCE LV-SB User Manual
Page 11
11
E LV-S-IM
Specifications
■ Sensor head
*1
When Spot 2 x 10 mm is selected (Values inside the parentheses ( ) indicate when Spot 2 x 2 mm is selected)
*2
When detecting a transparent glass object, install and set the LV-S63 so that the received light intensity without the glass object becomes 1000 or more.
■ Amplifier
*1
The model with B (BP) at the end of the name has additional functions such as zero datum function.
The LV-S62/S63 operates normally only with an amplifier unit that has B (BP) at the end of the model name.
The LV-S31/S61 operates normally only with an amplifier unit that has A (AP) or B (BP) at the end of the model name.
*2
The response time during Edge detection mode is the detection mode set on Page 7. Also, when one side of the output is used for Edge detection mode while HSP mode
is selected, the response time is 125 μs even when Normal detection or Area detection modes are selected. LV-S62/S63 does not handle HSP mode.
*3
When you connect eight or more amplifiers, limit the power voltage to 24 VDC ripple (P-P) 10 %.
*4
When several units are connected, the operating ambient temperature varies depending on the number of units to be connected. When connecting several units, be sure to
mount the units on the DIN rail (mounted on a metal plate), and keep the output current at 20 mA or less.
When 1 to 2 units are connected
: -10°C to +50°C
When 3 to 10 units are connected
: -10°C to +50°C
When 11 to 16 units are connected : -10°C to +45°C
Shearing machine
type
Distance setting
type
Reflective type
Reflective, side
view type
Straight beam,
retro-reflective type
Area retro-reflective
Transmission type
Model
LV-S31
LV-S41
LV-S41L
LV-S61
LV-S62
LV-S63
LV-S71
LV-S72
Light source
Visible light semiconductor laser Wavelength 655 nm Output 290 μW
Visible light semiconductor laser
Wavelength 660 nm
Output 290 μW
Visible light semiconductor laser
Wavelength 655 nm
Output 290 μW
FDA (CDRH)
Part1040.10
Class 1 Laser Product
IEC 60825-1
Class 1 Laser Product
Detecting range
50 to 200 mm
(Adjustment
range)
ULTRA : 500 mm
SUPER : 400 mm
TURBO : 300 mm
FINE : 200 mm
HSP : 150 mm
ULTRA : 400 mm
SUPER : 320 mm
TURBO : 240 mm
FINE : 160 mm
HSP : 120 mm
ULTRA : 2000 mm
SUPER : 1500 mm
TURBO :1000 mm
FINE : 750 mm
HSP : 500 mm
ULTRA :
10m (5m) *
1
SUPER : 8m (3.5m)*
1
TURBO : 5m (2m)*
1
FINE : 2.5m (0.7m)*
1
ULTRA : 30m
SUPER : 25m
TURBO : 15m
FINE : 8m
500 mm
Spot diameter
Approx. ø2 mm
Approx. ø1.2 mm
Approx. ø1.2 mm
Approx. ø2.5 mm
Switch with two levels:
Approx. 2 x 10 mm /
Approx. 2 x 2
(within 500 mm
distance)
Approx. 8 x 12 mm
(within 3.5 m
distance)
Approx. ø1.2 mm
Approx. ø6 mm
(with 500 mm
distance)
Indicator
Operation
indicator lamp
Red LED x 1
Beam axis
adjustment
indicator lamp
Red LED x 2,
Green LED x 1
Operation indicator lamp
Red LED x 1
Operation indicator lamp
Red LED x 1
(one on each of the transmitter and
receiver)
Standard detecting
object
100 mm
blank
paper
2 mm
blank paper
Opaque object
of
ø2.5 mm
When spot 2 x 10
mm is selected:
2 x 10mm,
0.5-mm-thick
transparent glass
(no AR coated)*
2
When spot 2 x 2 mm
is selected:
2 x 2mm,
0.5-mm-thick opaque
glass*
2
8 x 12 mm,
0.5-mm-thick
transparent
glass (no AR
coated) *
2
Opaque object of
ø1.5 mm
Opaque object of
ø1.0 mm
(detection distance 0
to 100 mm)
Opaque object of
ø0.8 mm
(detection distance
100 to 250 mm)
Opaque object of
ø0.8 mm
(detection distance
250 to 500 mm)
Operating ambient
temperature
0 to +50 °C
(No freezing)
-10 to +50 °C (No freezing)
Operating ambient light
Incandescent lamp : 10,000lx Sun light 20,000lx
Vibration resistance
10 to 55 Hz, 1.5 mm double amplitude in the X, Y, and Z directions, 2 hours respectively
Material
Housing
material
Glass reinforced resin
Metallic section: SUS304
Resin section: Polyarylate
Display
section
Polycarbonate
Polyarylate
Polycarbonate
Lens
section
Norbomenic
resin
Polyarylate
Norbornenic
resin
Acrylic resin
Acrylic resin
Transmitter lens:
Norbornenic resin
Receiver lens:
Polyarylate
Transmitter lens:
Norbornenic resin
Receiver lens:
Glass
Cable
PVC
Mounting
bracket
SUS304
Reflector
(R-4, R-6L, R-9)
-
-
-
Polycarbonate, Acrylic resin
-
-
Weight
Approx. 75 g
Approx. 70 g
Approx. 70 g
Approx. 65 g
Approx. 110 g
Approx. 70 g
Shearing machine type
Main unit
Expansion unit
Model *
1
NPN output
LV-11SB
LV-12SB
PNP output
LV-11SBP
LV-12SBP
Sensor head
LV-S Series (LV-S31 / S41 / S41L / S61 / S62 /S63 / S71 / S72)
Response time *
2
HSP : 80 μs
FINE : 250 μs
TURBO : 500 μs
SUPER : 2 ms
ULTRA : 4 ms
Control output
NPN (PNP) open collector x 2ch
40 VDC (30 V) max
100 mA max per output
Control input
Light emission stop input/external calibration input/Setting value bank selection input/received light intensity shift input
Input time (other than shift input) 20 ms fixed, (shift input) 5 ms/20 ms selectable
Rating
Power voltage *
3
12-24 VDC, Ripple (P-P): 10% max, Class2
Current
consumption
Normal: 1.7 W max. (140 mA max. at 12 V, 70 mA max. at 24 V)
Eco-all/Eco-half: 1.55 W max (130 mA max. at 12 V, 65 mA max. at 24 V)
Operating ambient
temperature *
4
-10 to +50 °C (No freezing)
Vibration resistance
10 to 55 Hz, 1.5 mm double amplitude in the X, Y, and Z directions, 2 hours respectively
Material
Housing material: Polycarbonate
Weight (including
cable)
Approx. 80 g
Only when using the LV-S31
When the detection mode is HSP: Response time 250 μs
When the detection mode is STD
Speed
1
2
3
4
Response time
500μs
2ms
8ms
32ms