Hangar 9 1/4-Scale J-3 Cub ARF - Manual (Page 35)

35
 .  .Step 9
Use.a.hobby.knife.and.hobby.scissors.to.trim.the.side.
windows..Use.canopy.glue.to.attach.the.side.windows..
into.position.
 .  .Step 10
Trim.the.rear.window.and.use.canopy.glue.to.secure.the.
rear.window.in.position.
 .Step 11
Repeat.Steps.9.and.10.for.the.opposite.side.windows.
 .Step 12
Complete.the.window.installation.by.trimming.and.
installing.the.upper.window.in.the.fuselage.
 .Step 13
Use.hook.and.loop.to.secure.the.pilot.in.the.fuselage.
Interior Detail Installation