Hangar 9 1/4-Scale J-3 Cub ARF - Manual (Page 15)

15
 .Step 8
Clip.the.clevis.to.the.strut.support.bracket..It.will.be.
necessary.to.adjust.the.position.of.the.clevis.to.ensure.
the.support.rods.are.not.causing.any.twists.between.the.
fuselage,.stabilizer.and.fin..Tighten.the.nuts.against.the.
clevises.once.all.adjustments.have.been.made.
Note:.Use.threadlock.on.the.nuts.and.clevises.
to.prevent.them.from.vibrating.loose.in.flight.
Stabilizer Installation