Ii.2 spindle selection – Brookfield DV-II+ Programmable Viscometer User Manual
Page 9
Brookfield Engineering Labs., Inc.
Page 9
Manual No. M/97-164-F1 102
I.7 Cleaning
Be sure to remove the spindle from the instrument prior to cleaning. Severe instru-
ment damage may result if the spindle is cleaned in place.
Instrument and Keypad:
Clean with a dry, non-abrasive cloth. Do not use solvents
or cleaners.
Immersed Components (spindles):
Spindles are made of stainless steel. Clean with a non-
abrasive cloth and solvent appropriate for sample mate-
rial.
Note: When cleaning, take care not to apply excessive force - it may bend the spindles.
See also other documents in the category Brookfield Measuring instruments:
- BF35 (23 pages)
- CAP1000 Viscometer (37 pages)
- CAP2000 Viscometer (37 pages)
- CAP1000 Viscometer (30 pages)
- Dial Stepper Viscometer (35 pages)
- Dial Viscometer (35 pages)
- DV1 Viscometer (63 pages)
- DV2+Pro Viscometer (101 pages)
- DV2T Extra Viscometer (95 pages)
- DV2T Viscometer (95 pages)
- DV3T Rheometer (125 pages)
- DV-E Viscometer (37 pages)
- DV-I Prime (71 pages)
- DV-I Viscometer (49 pages)
- DV-II+ Digital Viscometer (51 pages)
- DV-III Rheometer (64 pages)
- DV-III Rheometer (83 pages)
- DV-III Ultra Rheometer (133 pages)
- Falling Ball KF10 (18 pages)
- Falling Ball KF30 (19 pages)
- KU-1 Viscometer (11 pages)
- KU-1 Viscometer (13 pages)
- KU-2 Viscometer (19 pages)
- LFRA Texture Analyzer (46 pages)
- LFRA Texture Analyzer (30 pages)
- QTS25 Texture Analyzer (22 pages)
- R/S Coaxial Cylinder Rheometer (81 pages)
- R/S CPS Rheometer (62 pages)
- R/S-SST Rheometer (9 pages)
- RST Rheometer (69 pages)
- YR-1 Rheometer (64 pages)
- M14-TABTKIT (1 page)
- M14-TASBAWB1 (1 page)
- M14-TASBAWB3 (1 page)
- CT3 Texture Analyzer (56 pages)
- TA-DGA (2 pages)