Brookfield DV-II+ Programmable Viscometer - Manual (Page 73)

Brookfield Engineering Labs., Inc. Page 73 Manual No. M/97-164-F1 102
❏
Remove and return all spindles (properly packed
for shipping).
❏
Clean excess testing material off the instrument.
❏
Include MSDS sheets for all materials tested with
this instrument.
❏
Support pointer shaft with white, nylon shipping
cap, as shown in Figure K1, or with white plastic
shipping cap originally supplied with instrument.
❏
Pack the instrument in its original case. Cases are
available for immediate shipment from Brookfield.
If the case is not available, take care to wrap the
instrument with enough material to support it.
Avoid using foam peanuts or shredded paper.
❏
DO NOT send the laboratory stand unless there is
a problem with the upright rod, clamp or base. If
there is a problem with the stand, remove the
upright rod from the base and individually wrap
each item to avoid contact with the instrument. Do
not put lab stand in viscometer carrying case.
❏
Fill out a copy of the Viscometer Information Sheet
(on page 74) with as much information as possible
to help expedite your service. If you do not use
this form, please include a memo indicating the type
of problem you are experiencing or the service you
need performed. Please also include a purchase
order number for us to bill against.
❏
Package the instrument and related items in a strong
box for shipping. Mark the outside of the box with
handling instructions.
Example: "Handle with Care" or
"Fragile - Delicate Instrument"
For cone/plate instruments, please remove the cone spindle and carefully pack in place
in the shipping case. If available, use the original foam insert or roll up one sheet of
tissue paper (or similar) and place between the spindle coupling and cup assembly (see
Figure K2). This will help prevent damage in shipping.
CONE/
PLATE
Packaging Instructions to Return a Viscometer for Repair or Calibration
F
I
G
U
R
E
K
1
F
I
G
U
R
E
K
2
Foam Insert
or Tissue Paper