Aviom 6416dio - Manual (Page 99)

89 s
PeciFicAtioNs
Specifications
Digital Audio Channels 16 in, 16 out;
AES3 or AES‑3id digital data format
Digital I/O, AES3 DB25
version
DB25 connector, 2x, ch 1‑8 and ch 9‑16;
Digidesign®/Tascam® compatible and
Yamaha® compatible connectors provided
DB25 connector thumb
screws
Thread size is #4‑40 UNC
Digital Input, AES-3id
BNC version
2 channels per BNC connector, 8x
Digital Output, AES-3id
BNC version
2 channels per BNC connector, 8x
Audio Metering LED: Signal Present; on at ‑40dB and above
AES3 Ports Meet or exceed AES3 or AES‑3id specifications
for Input Level, Jitter Tolerance, CMR, and for
Output Level and Jitter Gain
AES3 Intrinsic Jitter 0.004 UI maximum @ 48.kHz sample rate
AES3 and Word Clock
Input Jitter Attenuation
‑3dB @ 100.Hz, ‑40dB @ 1kHz. (Well below the
AES3 JTF Mask)
Word Clock In, Out; BNC jacks
75 ohm termination switch
Input Sensitivity: 0.2 to 5.Vp‑p
(AC coupled)
Input Impedance: 70k ohms (75 ohms with
termination on)
Output Impedance: 20 ohms
Output Level: 3.Vp‑p into 75 ohms (short
circuit protected)
Generated Clock
Jitter/Wander
1.8ns peak at Clock Master; 50ns peak at a
Pro64 device 70 serial connections from the
Clock Master (relative to the Clock Master’s
reference).
Jitter/Wander
Spectrum
Flat above 600Hz; increases 6dB/octave
below 600Hz (inaudible due to masking). At
the 70th serial connection, increased wander
is due to inaudible spectral components
below 60Hz.