A-net transmit/receive, Auto mode, Manual mode - transmit – Aviom 6416dio User Manual
Page 50: A‑net transmit/receive, Auto mode manual mode ‑ transmit

40
F
roNt
P
ANel
F
eAtures
A-Net Transmit/Receive
The A‑Net Transmit settings affect 6416dio channels being sent into the
network. Receive settings set the port from which the 6416dio will draw
channels from the network to be output as AES3 digital data from the 6416dio
module’s rear panel jacks to other digital devices.
Auto Mode
When the Pro64 network is operating in Auto Mode, the red Auto LED in the
Network Mode section of the user interface will be lit. No user port settings
are available on a per‑module basis. It does not matter which rear‑panel
A‑Net port (A or B) is used when connecting Pro64 devices to the network
in Auto Mode.
When the network is operating in Auto Mode, both Port LEDs in the Transmit
and Receive sections will remain unlit. They function only in Manual Mode.
Remember, only the network Control Master can change the Network Mode
setting from Auto to Manual.
The Network Mode LEDs will display either Auto or Manual on all modules in
the network.
Manual Mode - Transmit
In Manual Mode, the user has the option of transmitting A‑Net data to either
or both A‑Net ports on the rear of the 6416dio module. Once the Control
Master has set the network to operate in Manual Mode, the red Manual
LED and at least one of the yellow Port LEDs will be lit on every Pro64 I/O
module.