Aviom 6416dio - Manual (Page 55)

45 F
roNt
P
ANel
F
eAtures
Pro64 Series Supported Sample Rates
Sample Rate Minimum Maximum
1x 44.1/48kHz 39.7kHz 52kHz
2x 88.2/96kHz 79.4kHz 104kHz
4x 176.4/192kHz 158.8kHz 208kHz
When using an external clock source, the Sample Rate display will light
the LED that is closest to the sample rate of the external clock source. For
example, if an external 48kHz Word Clock source running at the pulled‑up
+4% sample rate in a film/video application is used as the Pro64 network
clock, effectively providing the Pro64 network with a 49,920Hz clock, the
front panel 48kHz LED will light solid. No indication of the sample rate
variation is provided. Note that no sample rate conversion is required for the
Pro64 network to lock to this incoming clock speed variation, guaranteeing
pristine audio quality throughout the network.
Changing the Sample Rate
The network sample rate can be changed only at the Clock Master. Changing
the sample rate is done with the selection button found below the Sample
Rate LED readout.
To choose a new sample rate, press the selection button beneath the sample
rate list. Pressing the button selects the next sample rate in the list and
immediately starts blinking the new rate’s LED and the Enter/Cancel LED;
confirmation is required. To confirm the new sample rate, press the E
ntEr
button. To exit without changing the sample rate, press C
anCEl
.