Aviom 6416dio - Manual (Page 59)

49 F
roNt
P
ANel
F
eAtures
To link a pair of channels, both channels must be active first.
Channels linked as stereo pairs will be indicated on all connected analog or
digital output modules in the Pro64 network, even when the channels are
muted on an output module.
Stereo channel link information will also be transmitted to Pro16 devices such
as the A‑16II Personal Mixer that are connected to the Pro64 network via the
ASI A‑Net Systems interface.
Managed Button
The Managed button is used to put the network under control of a computer
for firmware updates, system monitoring, etc. Managed Mode can only be
engaged from the network’s Control Master.
When using a PC for firmware updates, etc., a Pro64 module cannot have
its RS‑232/422 (or MIDI port, if applicable) assigned to a VDC while the PC
is connected. Deactivate VDC assignments of this type before entering
Managed Mode.
To enter Managed Mode, press the M
anagEd
button; its LED will flash. The
Enter/Cancel LED will also flash. Press E
ntEr
to confirm the mode change or
C
anCEl
to return to the previous state.
To exit Managed Mode, press the M
anagEd
button; its LED will flash and the
Enter/Cancel LED will flash. Press E
ntEr
to confirm the mode change. The
network returns to the previous local mode, Auto or Manual.
In Managed Mode, Virtual Data Cable and channel Active buttons behave as
if the module is edit locked; they provide information only when pressed. All
other front panel edits are prohibited.