Aviom 6416dio - Manual (Page 12)

2 A
bout
Y
our
P
ro
64 P
roduct
The EtherCon Connector
Pro64 Series products feature locking connectors for all network I/O. The
Neutrik® EtherCon® connector is a dual RJ45‑type connector that can receive
a standard Category 5e cable or a cable fitted with the special locking
EtherCon connector.
When using a standard Cat‑5e cable, plug the cable into the center of the
EtherCon jack; release the cable by pressing on the small plastic tab built into
the cable connector.
The locking EtherCon connector is similar to an XLR plug, the kind commonly
used on microphone cables. Insert an EtherCon‑equipped cable into the
jack until it clicks and locks in place. To remove the cable, press on the metal
release tab at the top of the panel‑mounted EtherCon jack and pull the
connector outward.
The 6416dio has two A-Net ports, labeled A and B.
Package Contents
Check the contents of the shipping box carefully before making connections
and continuing with installation.
The 6416dio module box includes:
One 6416dio Digital I/O Module (DB25 or BNC model) •
Removable IEC power cord •
User Documentation •