Panasonic NV-HS1000EC - Manual (Page 61)

Before Requesting Service
sYMPTOttw
%. If , ■ ■. ^ ,». 4 -
“SBI" indication
flashes whenever
recording is
attempted. Erasure prevention tab on
cassette is broken off. Use tape with intact erasure prevention tab, or cover
tab hole with adhesive tape, if original recording is no
longer required.
Picture is recorded
with noise or blank
screen.
Aerial or aerial lead is
defective. Check aerial connection to VTR. See page 5.
Check your normal TV picture. If there is no picture,
check your aerial.
VTR is not correctly tuned. Re-tune VTR. See page 1 2 .
A1, A2 or A3 is selected. Select the required TV programme.
Timer recording
cannot be
performed. Clock or calendar is
incorrectly set. Check clock and calendar. Set to present time.
(Note this is a 24 hour clock.) See page 9.
Recording start or end time
settings are incorrect. Set recording start and end time correctly.
VTR is not set for timer
recording. Press TIMER REC after programming for timer
recording.
AV external
recordings cannot be
made.
A 1 , A2 or A3 is not selected. Select A 1 , A 2 or A3 by pressing /v V,
External AV connections are
incorrect.
Check that connections for external video and audio
source are correct. See page 33.
SYMPTOM C&^5WEci,;
Remote controller
does not operate
correctly.
Remote controller transmitter
beam is not reaching VTR. Ensure that remote controller is being pointed at VTR
and that transmitter beam is not obstructed.
Distance is too far. Use remote controller within 7 m of VTR. If this range
is not possible, replace batteries.
Batteries are exhausted. Replace batteries. Note precaution for replacement
on page 17.
Batteries are incorrectly fitted
with {+/-) reversed. Fit batteries correctly as shown on page 17.
i2
.c
a:
61