Panasonic NV-HS1000EC - Manual (Page 55)

Controls and Connection Sockets
^ Indicators for Stereo, Bilingual and NICAM
Reception
When receiving a TV programme, the type of sound
system in which it is broadcast is automatically
indicated.
0
Al Indicator
Lights up when the Al function is on.
©
0
0
INPUT SELECT
When Recording via the AV3 sockets on the front
panel, select A3 by pressing A V and set this switch
to S-VIDEO or LINE.
S-VIDEO: Through the S-VIDEO IN and AUDIO IN
sockets
LINE: Through the VtDEO IN and AUDIO IN
sockets
EDIT MODE
PLAYER:
When this VTR is used as the playback
VTR during editing operations.
RECORDER; When this VTR is used as the recording
VTR during editing operations.
•Normally set at this position.
PASSIVE; When operating this VTR using another
VTR or an editing controller.
•The picture quality best suited for
editing is selected.
•When setting at this position,
operation will not be possible and the
On Screen Display will not appear.
HI'Fi/NORMAL MIX
OFF: Normally set at this position to reproduce the
better sound available from the Hi-Fi track.
ON: Both sound tracks (the Hi-Fi sound track and
the normal sound track) are played back mixed
together. Use this setting when playing back a
cassette tape which has been insert edited or
audio dubbed.
VIDEO MODE
COLOUR; When performing recording and playback
in colour.
AUTO: The VTR automatically distinguishes
between colour and black-and-white
during recording and playback.
B/W: When performing recording and playback
in black-and-white.
A1
ON:
Using the Ai function, recording and playback
are performed in the state which achieves
optimum picture quality in light of
characteristics of a tape.
•The picture sharpness cannot be adjusted in
this setting.
Turns off the A! function. OFF:
0 MONO
OFF: Normally set at this position.
ON; Only set at this position to record the normal
sound during a stereo, bilingual or NICAM
broadcast or if the stereo sound is distorted due
to inferior reception conditions.
0 CHECK/PROG
To select a timer programme number.
“1,2,3... or 8" is lit.
To display details of preset timer recording.
0 SLEEP (SHIFT)
To set the time to turn off the VTR automatically.
To blank unoccupied programme position.
0 TIMER REG
To turn the timer recording function on and off.
H is lit or not lit.
Once Operating timer recording function, the normal
VTR operation is not possible unless this button is set
to off.
0 EDIT MENU
To perform editing operations.
0 A ▼
To make selections from On Screen Display.
0 ENTER
To make selections from On Screen Display.
0 PROG. CLEAR
To cancel an editing programme.
0 ESC
To return to the previous page on the screen.
To stop editing.
0 PLAYER
To operate the playback VTR.
0 MARKIN
To set the edit start point.
© RECORDER
To operate the recording VTR.
0 MARK OUT
To set the edit end point.
© Shuttle Ring
To adjust playback speed backward or forward.
0 Jog Dial
To locate any desired frame with utmost precision.
C
.o
•C
.a
o
CO
Q
55