Panasonic NV-HS1000EC - Manual (Page 13)

Storing TV Broadcasts into your VTR
§
O)
.C
00
Direct Channel Input Tuning Procedure
If you know the channels on which the TV stations can be
received, the TV stations can be tuned in by following the
steps given below,
1 Keep TUNER PRESET pressed for more than
2 seconds.
2 Select the programme position by using A (+) or V
(-), then press SP/LP (NEXT).
3 Select normal TV station or Pay TV (e.g. Canal Plus,
Filmnet) station by pressing SLEEP (SHIFT).
• 1; To preset normal TV stations.
•2: To preset Pay TV stations.
4 Input the channel number for the required TV station by
using Number buttons on the remote controller.
•Press SP/LP (NEXT) and repeat steps 2-4 for each
programme position you want to tune to a station.
5 Press TUNER PRESET twice.
Fine Tuning Procedure
1 Keep TUNER PRESET pressed for more than
2 seconds, and then press again.
2 Press SP/LP (NEXT).
3 Press A (+) or V (—) to obtain the best tuning
condition.
•"AFC” Indicator disappears.
•To return the tuning to its former state, press SLEEP
(SHIFT).
4 Press TUNER PRESET.
Blanking of Unoccupied Programme
Positions
1 Keep TUNER PRESET pressed for more than
2 seconds.
2 Select a programme position which you do not want to
tune to a TV station, by using A (+) or V (-).
3 Press SLEEP (SHIFT). ” is displayed.)
•Repeat steps 2 and 3 for another unoccupied
programme positions to skip during the selection of the
programme positions.
•To cancel the blanking of a programme position, select
that programme position on the VTR and then press
SLEEP (SHIFT).
4 Press TUNER PRESET twice.
Channel Plan
Chamiel truScatlofi^i,
,4- *v-
'y '
hiJ'-' i . ''
2-12 E2-E12
13-20 —
21-69 21-69
74-76 SI-S3
80-82 M1-M3
83-89 M4-M10
90-99 U1-U10
121-141 S21-S41
13