Panasonic NV-HS1000EC - Manual (Page 59)

fnfra-red Remote Controller
1 OPERATE (TV)
To turn the TV on and off.
•With some TV models, it may only be possible to turn
the TV off using this button.
2 TV/AV
To select the TV input.
3 DISPLAY
To change the indication on the VTR Display.
j-»Clock—»Counter-»Remaining Tape Time—|
4 PAUSE/STILL
During playback; Still picture
During recording: To interrupt recording
5 SLOW
To activate slow playback.
6 VA(VTR)
To select the required programme position (TV
station) of the VTR.
7 INDEX
For the index search function.
8 VA(TV)
To select the required programme position (TV station)
of the TV.
9 VOLUME
To adjust the volume of the TV.
10 Display
11 Infra-red Transmitter
The programming data are transmitted from here to the
VTR.
1 2 A V (Y)
•To programme a timer recording.
•To set the clock.
•To preset the TV stations.
13 DATE(M)
19 ERASE
To erase Index Signals.
20 WRITE
To write Index Signals.
21 TAPE SELECT
To set the cassette tape length in order to obtain
correct indication of the remaining tape time.
E195; For E30, -60, -90, -120, -180 and -195 tapes
E240: For E240 tape
E260: For E260 and -300 tapes
22 TRACKING/V-LOCK
For manual tracking adjustment
The -H and - buttons are used to adjust the tracking
when, for example, noise bars on the picture are better
removed manually than by the automatic digital
tracking control. After making a manual adjustment,
press both buttons together to return to automatic
digital tracking control.
For slow tracking adjustment
When noise bars appear during Still, Still Advance or
Slow playback, switch over to slow playback and adjust
with the -H or - Button to reduce the noise bars.
For vertical locking adjustment
Use the + and - buttons to minimize any vertical jitter
during still-picture playback.
23 Number Buttons
•To select the programme positions.
9: CO
19:
•To enter a ShowView number.
24 PDCAfPS
To turn the PDC/VPS function on and off.
25 TRANSMIT
To transmit the data that has been set on the remote
•To set the clock. controller to the VTR.
.o
14 SHOWVIEW 26 CANCEL
For the ShowView programming. To cancel timer programmes. ,Q.
15 RECORDING SP/LP 27 CHECK O
CO
CD
To select the tape speed desired for recording. To check timer programmes.
16 CONFIRM
To convert the data of a ShowView number.
28 OFF(H/M)
•To programme a timer recording.
Q ■
17 OSD
For the On Screen Display Function.
•To set the clock.
•To preset the TV stations.
•To set the manufacturer number of the TV.
18 CLOCK/PRESET
•To set the dock.
•To preset the TV stations.
•To set the manufacturer number of the TV,
29 ON(D)
•To programme a timer recording.
•To set the dock.
59