To select the desired tape speed, To interrupt recording, To record one tv programme while – Panasonic NV-HS1000EC User Manual
Page 23: Viewing another programme, To display the approximate remaining, Tape time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-the-spot Recording
To select the Desired Tape Speed
Press SP/LP before recording.
RECORDING
Is"
To interrupt Recording
Press PAUSE/STILL during recording.
Press again to continue recording.
PAUSE/STILL
©
To record One TV Programme while
Viewing Another Programme
1 Refer to the on-the-spot recording operations steps 1
to3.
2 Select the TV programme on your TV set you wish to
view at the present time.
To display the Approximate Remaining
Tape Time
1 Press TAPE SELECT to select the corresponding
cassette tape length.
TAPE SELECT
C)
El95; ForE30,-60, -90,-120,-180 and-195 tapes
E240; For E240 tape
E260: For E260 and-300 tapes
2 Press DISPLAY.
DISPLAY
O
r^Clock-^Counter^Remaining Tape Time^
CO
c
.o
5
CD
a
o
.o
3
ca
Notes:
•When a video cassette with a broken off tab is inserted,
the “EH" indication will flash to indicate that recording is
not possible.
•The recording pause mode will be automatically released
after 5 minutes, and be back to the stop mode.
23