Panasonic NV-HS1000EC - Manual (Page 16)

Setting the Remote Controller for Operation of
your TV
You can operate some manufacture of TVs (see table
below) using the supplied remote controller after this setting
up.
Number
1
Panasonic
2
3
4
5 GRUNDIG/Blaupunkt
6 PHILIPS
7 SONY
Preparation
•Turn on the TV.
•Install the batteries in the remote controller.
Operations Display Symbols
^ Open the door of the remote controller.
O Keep CLOCK/PRESET pressed for
^ more than 2 seconds and then press it
twice.
o
CLOCK/PRESET
•“TV” now appears on the remote controller's
display.
Press OFF several times.
OFF
o n
. J
J
•When the number matches the manufacturer of
your TV, the TV’s power is turned off.
Press CLOCK/PRESET.
o
CLOCK/PRESET
iwn ■"¿ff;
Close the door of the remote controller.
When the number is 1,2,3 or 4;
When the TV’s power is turned off in step 3 above, turn it
back on and adjust the TV’s volume using this remote
controller. The volume can be adjusted if the number
matches the manufacturer of TV. if it is not possible to
adjust the TV’s volume, try setting the number (1 to 4) to
match the manufacturer of TV again until the volume can be
adjusted.
Note:
Some TV models cannot be operated using this remote
controller.
16