Configuration files, Create and configure the subinterface ge 1/0/0.2 – Panasonic NN46240-502 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 VLAN configuration
Nortel Secure Router 8000 Series
Configuration - LAN Access and MAN Access
# Create and configure the subinterface GE 1/0/0.2.
[Router] interface gigabitethernet 1/0/0.2
[Router-GigabitEthernet1/0/0.2] vlan-type dotlq 20
[Router-GigabitEthernet1/0/0.2] ip address 10.110.5.3 255.255.255.0
[Router-GigabitEthernet1/0/0.2] quit
Step 2 Configure the interface connected with Switch A on the router.
# Create and configure the subinterface GE 2/0/0.1.
[Router] interface gigabitethernet 2/0/0.1
[Router-GigabitEthernet2/0/0.1] vlan-type dot1q 30
[Router-GigabitEthernet2/0/0.1] ip address 10.110.4.3 255.255.255.0
[Router-GigabitEthernet2/0/0.1] quit
# Create and configure the subinterface GE 1/0/0.2.
[Router] interface gigabitethernet 2/0/0.2
[Router-GigabitEthernet2/0/0.2] vlan-type dot1q 40
[Router-GigabitEthernet2/0/0.2] ip address 10.110.3.3 255.255.255.0
[Router-GigabitEthernet2/0/0.2] quit
Step 3 Verify the configuration.
After the configuration is complete, on each host, configure the IP address of the subinterface,
which belongs to the same VLAN as the local host, as the default gateway. The hosts in
VLAN10, VLAN20, VLAN30, and VLAN40 can now communicate with each other.
—End
Configuration files
#
sysname Router
#
interface GigabitEthernet1/0/0.1
vlan-type dot1q 10
ip address 10.110.6.3 255.255.255.0
#
interface GigabitEthernet1/0/0.2
vlan-type dot1q 20
ip address 10.110.5.3 255.255.255.0
#
interface GigabitEthernet2/0/0.1
vlan-type dot1q 30
ip address 10.110.4.3 255.255.255.0
#
interface GigabitEthernet2/0/0.2
vlan-type dot1q 40
ip address 10.110.3.3 255.255.255.0
#
4-12
Nortel Networks Inc.
Issue 5.3 (30 March 2009)