See “example of configuring a mac address table, Data preparation, Configuration procedure – Panasonic NN46240-502 User Manual
Page 37: Configuration files, Networking requirements, Configuration roadmap
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 MAC address table configuration
Nortel Secure Router 8000 Series
Configuration - LAN Access and MAN Access
Data preparation
To complete the configuration, you need the following data:
• The MAC address of the user is 0011-2233-4455.
• The name of the VSI to which the interface belongs is vsi2.
• The port is GE 1/0/0.
• The aging time is 500 seconds.
Configuration procedure
Step 1 Configure the static MAC address entry.
[Nortel] mac-address static 0011-2233-4455 gigabitethernet 1/0/0 vsi vsi2
Step 2 Set the aging time of dynamic entries to 500 seconds.
[Nortel] mac-address aging-time 500
—End
Configuration files
#
sysname Nortel
#
Vsi vsi2
#
mac-address aging-time 500
#
interface GigabitEthernet1/0/0
mac-address static 0011-2233-4455 GigabitEthernet1/0/0 vsi 2
#
return
2.4.2 Example of configuring the MAC address learning limit
based on a VSI
Networking requirements
To enhance security, configure the MAC address learning limit on VSI vsi1.
Configuration roadmap
The configuration roadmap is as follows:
• Configure the limit rules.
• Enable the MAC address learning limit feature.
Configuration procedure
• Configure the maximum number of MAC addresses that can be learned to 100, and
configure the maximum rate for learning a MAC address to 50 milliseconds (ms) on VSI vsi1.
2-8
Nortel Networks Inc.
Issue 5.3 (30 March 2009)