1 clearing interface statistics, 2 debugging the interface, 1 clearing interface statistics -8 – Panasonic NN46240-502 User Manual

Page 27: 2 debugging the interface -8, 3 maintaining interfaces

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1 LAN access overview

Nortel Secure Router 8000 Series

Configuration - LAN Access and MAN Access

1.3 Maintaining interfaces

This section covers the following topics:

1.3.1 Clearing interface statistics

You cannot restore interface statistics after you clear them. Be sure that you want to clear the

statistics before you use the command.
To clear the statistics, run the following reset command in the user view.

Action

Command

Clear the interface statistics.

reset counters interface [ interface-type

[ interface-number ] ]

1.3.2 Debugging the interface

Debugging a^ects system performance. After you debug the interface, run the undo

debugging all command to disable debugging.

When a fault occurs on an interface, run the debugging command in the user view to locate

the fault.

For information about the debugging command related to specific interfaces, see the

corresponding maintenance sections in subsequent chapters in this document.

1-8

Nortel Networks Inc.

Issue 5.3 (30 March 2009)