1 establishing the configuration task, 2 changing mac address entries, 2 classification of mac address entries -2 – Panasonic NN46240-502 User Manual
Page 32: 1 establishing the configuration task -5, 1 introducti, 2 configuring a mac address table, Applicable environment, Preconfiguration tasks, Data preparation, Configuration procedures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration - LAN Access and MAN Access
2 MAC address table configuration
Currently, you can set the MAC address learning limit on a Virtual Switch Instance (VSI).
03 NOTE
The MAC address learning limit is available only on Layer 2 interfaces, such as Fast Ethernet (FE) and
Gigabit Ethernet (GE), except for the 10GE interface. It is unavailable on other physical interfaces,
logical interfaces, and subinterfaces.
2.2 Configuring a MAC address table
2.2.1 Establishing the configuration task
Applicable environment
To use a MAC address table, you need to configure the basic functions of the MAC address
table.
Preconfiguration tasks
None
Data preparation
To configure a MAC address table, you need the following data.
No. Data
1
MAC address
2
Port number
3
Aging time of the MAC address table
Configuration procedures
No. Procedure
1
Changing MAC address entries (optional)
2
Setting the aging time of a MAC address table (optional)
3
2.2.2 Changing MAC address entries
Do as follows on all routers:
Step 1 Run:
system-view
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
2-3