Configuration files, Configuration file of router a, Configuration file of router b – Panasonic NN46240-502 User Manual
Page 53: Configuration file of router c
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3 Ethernet interface configuration
Nortel Secure Router 8000 Series
Configuration - LAN Access and MAN Access
Step 4 Verify the configuration.
After the configuration, you can use the following methods to check whether the configured
interface operates normally:
• In the case of low tragic volume, ping the Ethernet interfaces of a router from another
router. If all the ping packets are returned, the interfaces are normal.
• Check the statistics of a router. If the number of received error frames does not change,
the interfaces are normal.
Check the interface status of each router. In normal operation, the physical status and protocol
status are Up.
Consider Router A as an example:
*down: administratively down
(l): loopback
(s): spoofing
Interface
IP Address
Physical Protocol Description
GigabitEthernet1/0/0
202.38.165.1 up
up
RouterA
—End
Configuration files
• Configuration file of Router A:
#
sysname RouterA
#
interface GigabitEthernet1/0/0
ip address 202.38.165.1 255.255.255.0
description RouterA
#
return
• Configuration file of Router B:
#
sysname RouterB
#
interface GigabitEthernet1/0/0
ip address 202.38.165.2 255.255.255.0
description RouterB
#
return
• Configuration file of Router C:
#
sysname RouterC
#
interface GigabitEthernet1/0/0
ip address 202.38.165.3 255.255.255.0
description RouterC
#
return
3-10
Nortel Networks Inc.
Issue 5.3 (30 March 2009)