Configuration roadmap, Data preparation, Configuration procedure – Panasonic NN46240-502 User Manual

Page 52: Step 1 configure router a, Step 2 configure router b, Step 3 configure router c

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Nortel Secure Router 8000 Series

Configuration - LAN Access and MAN Access

3 Ethernet interface configuration

Figure 3-1 Networking diagram of Ethernet interface configuration

RouterC

Configuration roadmap

The configuration roadmap is as follows:

• Configure a description for each router.

• Configure IP addresses for interfaces on each router.

Data preparation

To configure an Ethernet interface, you need the following data:

• Interface number

• IP address of the interface

Configuration procedure

Step 1 Configure Router A.

system-view

[RouterA] interface gigabitethernet 1/0/0

[RouterA-GigabitEthernet1/0/0] description RouterA

[RouterA-GigabitEthernet1/0/0] ip address 202.38.165.1 255.255.255.0

[RouterA-GigabitEthernet1/0/0] quit

Step 2 Configure Router B.

system-view

[RouterB] interface gigabitethernet 1/0/0

[RouterB-GigabitEthernet1/0/0] description RouterB

[RouterB-GigabitEthernet1/0/0] ip address 202.38.165.2 255.255.255.0

[RouterB-GigabitEthernet1/0/0] quit

Step 3 Configure Router C.

system-view

[RouterC] interface gigabitethernet 1/0/0

[RouterC-GigabitEthernet1/0/0] description RouterC

[RouterC-GigabitEthernet1/0/0] ip address 202.38.165.3 255.255.255.0

[RouterC-GigabitEthernet1/0/0] quit

Issue 5.3 (30 March 2009)

Nortel Networks Inc.

3-9