beautypg.com

Panasonic 7 User Manual

Page 84

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

84 Chapter 4 Configuring user tunnels

Static IP Address option in the Profiles > Groups > Connectivity option (it is

only used if the group allows it). If an IP address that is entered here is used

instead of a DHCP server-assigned IP address, then only one login is allowed.

Enter the subnet mask. Assigning the correct subnet mask to a remote IPsec

client is important when using split tunneling. When you enable split

tunneling, packets destined to a host in the Split Tunnel Network list are

directed into the tunnel by the IPsec client. All other traffic goes through a

standard LAN or dial-up interface. This occurs on the client by adding the

routes listed on the Split Tunnel Network list to the route table of the

Microsoft TCP/IP stack and pointing those routes to the tunnel adapter

interface. A route is also added to the route table based on the subnet mask

assigned to the tunnel adapter. The IPsec Subnet Mask field allows you to
specifically assign a subnet mask to a remote IPsec client that obtains an IP
address either from the IP address pool, DHCP, RADIUS, or a static user

configuration.

Note: If a host route for the destination address of the Nortel VPN

Router exists in the TCP/IP route table prior to launching the Nortel

VPN RouterVPN Client, the route is deleted when the tunnel is closed.

* •

7 Enter a User ID and password. The User ID has a maximum length of 256

characters. The User password has a maximum of 32 characters.

To search within a selected group and then configure a user’s account:

1

Go to Profiles > Users

2

Select a group from which you want to search for a particular user from the

Group drop-down list box (at the top of the window), and click on Display.

The search is limited to the available groups.

3

Enter the appropriate text to search for in the input box.

4

Select one of the following as the preferred search method, then click on
Search.

Last Name searches for a last name. You must enter the entire last name.

UID searches for a user ID.

Admin Rights searches for anyone who has View or Manage

administrator privileges.

NN46110-500

6