Panasonic 7 - Manual (Page 47)

Chapter 2 Getting started 47
5 Please enter the administrator's password: setup
Note: The factory default user name is admin and the default password
is setup.
Note: This administrator’s password is also the primary administrator’s
password. This password guarantees access to the Nortel VPN Router
through the serial port or a Web browser. This administrator’s user ID
(default = admin) and password (default = setup) combination is also
called the primary administrator. This person always has access to all
windows and controls, including the serial port and the recovery disk.
Only one primary administrator is allowed.
6 After the user name and password have been entered, the following menu
appears:
The following menu appears:
Main Menu: System is currently in NORMAL mode.
0) Management Address
1) Interfaces
2) Administrator
3) Default Private Route Menu
4) Default Public Route Menu
5) Create A User Control Tunnel (IPsec)
6) Restricted Management ModeFALSE
7) Allow HTTP ManagementTRUE
8) Firewall Options
9) Shutdown
B) System Boot Options
P) Configure Serial Port
C) Controlled Crash
L) Command Line Interface
R) Reset System to Factory Defaults
E) Exit, Save and Invoke Changes
Profile
Please select a menu choice (0 - 9,B,P,C,L,R,E):
7 Type 1 and press Enter to display the configured Interfaces:
Please select a menu choice (0 - 9,B,P,C,L,R,E): 1
Nortel VPN Router Configuration — Basic Features