Panasonic 7 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2 Getting started 43
The following menu appears:
Main Menu: System is currently in NORMAL mode.
0) Management Address
1) Interfaces
2) Administrator
3) Default Private Route Menu
4) Default Public Route Menu
5) Create A User Control Tunnel (IPsec) Profile
6) Restricted Management ModeFALSE
7) Allow HTTP ManagementTRUE
8) Firewall Options
9) Shutdown
B) System Boot Options
P) Configure Serial Port
C) Controlled Crash
L) Command Line Interface
R) Reset System to Factory Defaults
E) Exit, Save and Invoke Changes
Please select a menu choice (0 - 9,B,P,C,L,R,E):
6
Type 0 and press Enter to display the Management IP Address menu.
Please select a menu choice (0 - 9,B,P,C,L,R,E): 0
- Management IP Address menu
M) Management IP Address = 192.168.249.44
R) Return to the Main Menu
Please select a menu choice (M,R):
7
Type M and press Enter to change the Management IP address. The current
IP address appears. The Old Management IP Address field is blank on a new
Nortel VPN Router.
Please select a menu choice (M, R): M
Type 0.0.0.0 to delete.
Just type
Old Management IP Address = 192.168.249.44
New Management IP Address =
Nortel VPN Router Configuration — Basic Features