Panasonic 7 - Manual (Page 160)

160 Chapter 8 Configuring IPSec mobility and persistent mode
To view the IPSec configuration for the group, for example Base:
CES(config)# show groups ipsec "/Base"
IPSEC Settings:
Rekey Timeout
Rekey Data Count
Perfect Forward Secrecy
Banner
Configured
Domain name
Configured
Display Banner
Compression
Primary DNS Address
Primary WINS Address
Secondary DNS Address
Secondary WINS Address
Allow Clients
Allow undefined networks for non-Contivity clients
Allow Password Storage on Client
ESP - AES 256 with SHA1 Integrity
ESP - AES 128 with SHA1 Integrity
ESP - Triple DES with SHA1 Integrity
ESP - Triple DES with MD5 Integrity
ESP - 56-bit DES with SHA1 Integrity
ESP - 56-bit DES with MD5 Integrity
ESP - 40-bit DES with SHA1 Integrity
ESP - 40-bit DES with MD5 Integrity
ESP - NULL (Authentication Only) with SHA1 Integrity
ESP - NULL (Authentication Only) with MD5 Integrity
AH - Authentication Only (HMAC-SHA1)
AH - Authentication Only (HMAC-MD5)
IKE 56-bit DES with Group 1 (768-bit prime)
IKE Triple DES with Group 2 (1024-bit prime)
IKE Triple DES with Group 7 (ECC 163-bit field)
IKE AES 128 with Group 5 (1536-bit prime)
IKE AES 128 with Group 8 (ECC 283-bit field)
ISAKMP Initial Contact Payload Accept
Client Failover Tuning
Client Failover Tuning Interval
Client Failover Tuning Max Number of Retransmissions
Client NAT Interval
Client Auto Connect
Client Auto Connect Type :
Traffic
Client Auto Connect Networks
Configured
Client Auto Connect Domains
08:00:00
0
Enabled
Not
Not
Disabled
Enabled
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
ALL
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
00:01:00
3
Disabled
Disabled
Any Network
: Not
: Not
NN46110-500