Configuring mva with the serial menu – Panasonic 7 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
34 Chapter 2 Getting started
Configuring MVA with the serial menu
To configure the MVA with the serial menu:
1
Connect the serial cable (supplied with your Nortel VPN Router) from the
Nortel VPN Router serial port to a terminal or a communications port of a PC.
2
Power on the terminal or PC.
3
Using a terminal emulation program, such as HyperTerminal on the PC, press
Enter. Your terminal emulator must use the following communications
parameters:
9600 baud
8 data bits
1 stop bit
No parity
No flow control
The Welcome window appears and you are prompted to supply a user name
and password.
4
5
Welcome to the Nortel VPN Router
Copyright 1999,2000,2001 Nortel Networks
Version: V07_00.140
Creation date: Jan. 7, 2007, 20:51:06
Date: 04/27/2007
Unit Serial Number: 17563
Enter the administrator's user name,
admin.
Enter the administrator's password,
setup.
Note:
The factory default user name is admin and the default password
is setup.
NN46110-500