Yamaha RX-V663 - Manual (Page 93)

Customizing this unit (MANUAL SETUP)
2 VOLUME MENU
Use this menu to manually adjust the various volume
settings.
2 UOLUME MENU
ADAPT IUE DRC-- OFF
ADAPTIUE DSP
LEUEL--- OFF
MUTE TVPE--- FULL
MAX UOL.--- +16.5dB
INIT. UOL...... OFF
[A]/[T]: IJp/Down
[■^]/[N-]: Select
Adaptive dynamic range control
ADAPTIUE DRC
Use this feature to adjust the dynamic range in
conjunction with the volume level. This feature is useful
when you are listening at lower volumes or at night. When
“ADAPTIVE DRC” is set to “AUTO”, this unit controls
the dynamic range as follows:
- If the VOLUME setting is low:
the dynamic range is narrow
- If the VOLUME setting is high:
the dynamic range is wide
VOLUME: low VOLUME: high
Functions
AUTO Adjusts the dynamic range automatically.
OFF Does not adjust the dynamic range automatically.
• You can also adjust the dynamic range of the bitstream signal
sources by using “DYNAMIC RANGE” in “SOUND MENU”
(see page 91).
• This function is also useful for listening with your headphones.
Notm
The adaptive dynamic range control feature does not function
when this unit is in the Pure Direct mode (see page 52).
Adaptive DSP level ADAPT I UE DSP LEUEL
Use this feature to make fine adjustments of the DSP
effect level (see page 73) automatically in conjunction
with the volume level.
Choice Pyoctkmt
AUTO Adjusts the DSP effect level in conjunction with
the volume level.
OFF Does not adjust the DSP effect level
automatically.
Note
Even if you set “ADAPTIVE DSP LEVEL” to “AUTO”, this unit
does not change but the fine-tunes the specified value of “DSP
LEVEL” (see page 73).
Muting type MUTE TVPE
Use this feature to adjust how much the mute function
reduces the output volume (see page 45).
Chokm
PlNn№th»n«
FULL Mutes all the audio output.
-20dB Reduces the current volume by 20 dB.
Maximum volume MAX UOL.
Use this feature to set the maximum volume level in the
main zone. This feature is useful to avoid the unexpected
loud sound by mistake. For example, the original volume
range is -80.0 dB to +16.5 dB. However, when “MAX
VOL.” is set to -5.0 dB, the volume range becomes
-80.0 dB to -5.0 dB.
Control range: -30.0 dB to +15.0 dB,
+16.5 dB
Control step: 5.0 dB
Notes
• When this unit is in the auto setup procedure, the volume level
is automatically set to 0 dB regardless of the current “MAX
VOL.” setting.
• The “MAX VOL.” setting takes priority over the initial volume
setting. For example, if “INI. VOL.” is set to -20.0 dB and
“MAX VOL.” is set to -30.0 dB, the volume level is
automatically set to -30.0 dB when you turn on the power of
this unit next time.
• Use “MAX VOL.” in “ZONE SET” to set the initial volume
level in Zone 2.
Initial volume IHIT. UOL-
Use this feature to set the volume level of the main zone
when the power of this unit is turned on.
Choices:
OFF,
MUTE, -80.0 dB to +16.5 dB
Control step: 0.5 dB
Note
The “MAX VOL.’
setting.
setting takes priority over the initial volume
89 En