Yamaha RX-V663 - Manual (Page 29)

Connections
■ Connecting a multi-format player or an external decoder
This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and
SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or pre­
amplifier.
If you set “INPUT CH” to “8CH” in “MULTI CH” (see page 95), you can use the input jacks assigned as “FRONT’ in
“MULTI CH’’ (see page 95) together with the MULTI CH INPUT jacks to input 8-channel signals.
Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to
match the left and right outputs to the left and right input jacks for the front and surround channels.
NotBS
• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 43), this unit automatically
turns off the digital sound field processor, and you cannot select sound field programs.
• This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that
you connect at least a 5.1-channel speaker system before using this feature.
n
Multi-format player/External
decoder (5.1-channel output)
Multi-format player/External
decoder (7.1-channel output)
*1 The analog audio input jacks assigned as “FRONT” in “MULTI CH” (see page 95).
■ Connecting a Yamaha IPod universal
dock or Bluetooth adapter
This unit is equipped with the DOCK terminal on the rear
panel that allows you to connect a Yamaha iPod universal
dock (such as YDS-10, sold separately) or Bluetooth
adapter (such as YBA-10 sold separately). Connect a
Yamaha iPod universal dock or Bluetooth adapter to the
DOCK terminal on the rear panel of this unit using its
dedicated cable.
Refer to “Using iPod^^^” on page 68 for playback of your iPod
and “Using Bluetooth^^ components” on page 70 for playback of
your Bluetooth components.
'4 ipili
8
€i f: 'V ■ "
A
Yamaha iPod universal dock
or Bluetooth adapter
25 En