Yamaha RX-V663 - Manual (Page 104)

Remote control features
In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha
and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code
for each input source (see page 102).
Controlling this unit, a TV, or other components
■ Controlling this unit
Press ©AMP to control this unit.
® AMP lights up for a few seconds after you press
©AMP and any buttons (expect input selector buttons)
when the remote control is controlling this unit.
Notes
These buttons always control this unit.
*2 These buttons control this unit only when (DAMP is pressed.
*3 ©A or B is the optional component control area button. You
can control the desired component without changing the input
source of this unit.
■ Controlling a TV
Press ©DTV/CBL to control your TV. To control your
TV, you must set the appropriate remote control code for
DTV/CBL (see page 102).
Notes
* 1 These buttons always control your TV regardless of whether
you press ©DTV/CBL or not.
ftMitoteecMtiMI V, ; „ |
TV POWER Turns on or off the power.
TV CH +/- Changes the channel number.
TV VOL +/-
Increases or decreases the volume
level.
TV INPUT Changes the input source.
TV MUTE Mutes the audio output.
*2 These buttons control your TV only when ©DTV/CBL is
pressed. For details, see the “Digital TV/Cable TV” column on
page 101.
You can control more than one TV by setting the appropriate
remote control code for any input source selector buttons other
than ©DTV/CBL. In such a case, you can control the buttons
highlighted above (*1 and *2) when you press the input source
selector button.
lOOEn