Virtual cinema dsp), Noté, Notes – Yamaha RX-V663 User Manual

Page 55: Press ©straight (or ©straight) to select “straight, Deactivating the “straight” mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sound field programs

■

Using sound field programs without

surround speakers
(Virtual CINEMA DSP)

Virtual CINEMA DSP allows you to enjoy the CINEMA

DSP programs without surround speakers. It creates

virtual speakers to reproduce the natural sound field.

When you set “SUR. L/R SP” to “NONE” (see page 86),

Virtual CINEMA DSP activates automatically whenever

you select a sound field program (see page 48).

Noté

Virtual CINEMA DSP will not activate even when “SUR. L/R

SP” is set to “NONE” (see page 86) in the following cases:

- when the component connected to the MULTI CH INPUT

jacks is selected as the input source (see page 43).

- when headphones are connected to the PHONES jack.

- when this unit is in the “7ch Stereo” mode.

■

Enjoying multi-channel sources and

sound field programs with headphones
(SILENT CINEMA)

SILENT CINEMA allows you to enjoy multi-channel

music or movie sound, including Dolby Digital and DTS

sources, through ordinary headphones. SILENT CINEMA

activates automatically whenever you connect headphones

to the PHONES jack while listening to sound field

programs (see page 48). When activated, the SILENT

CINEMA indicator lights up in the front panel display.

Notes

• SILENT CINEMA does not activate when the component

connected to the MULTI CH INPUT jacks is selected as the

input source (see page 43).

• SILENT CINEMA is not effective when the “Pure Direct” (see

page 52) or “2ch Stereo” mode (see page 50) is selected, or

when this unit is in the “Straight” mode (see page 51).

Before performing the following operation, press

(DAMP

the remote control.

Enfoyfng unpmesseti Input
sources (Straight decoding mode)

When this unit is in the “Straight” mode, 2-channel stereo

sources are output from only the front left and right

speakers. Multi-channel sources are decoded straight into

the appropriate channels without any additional effect

processing.

■ Deactivating the “Straight” mode

The sound effect is turned back on.