Controlling zone 2 with the remote controi, Notes, 105fn – Yamaha RX-V663 User Manual

Page 109

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using multi-zone configuration

Operate the following operations after activating the Zone 2

operation mode.

Operating Zone 2

Press ©INPUT <3 /1> to select the desired input

source while the ZONE2 indicator is flashing in
the front panel display.

•

Select “TUNER” as the input source to use the TUNER

features in Zone 2. For details about the TUNER

operations, see “FM/AM tuning” on page 53.

•

Select “XM” as the input source to use the XM

Satellite Radio features in Zone 2. For details about the

XM Satellite Radio operations, see “XM Satellite

Radio tuning” on page 57.

•

Select “SIRIUS” as the input source to use the SIRIUS

Satellite Radio features in Zone 2. For details about the

SIRIUS Satellite Radio operations, see “SIRIUS

Satellite Radio^^ tuning” on page 62.

•

Select “V-AUX” as the input source to use iPod

features in Zone 2. For details about the iPod

operations, see “Using iPod^M” on page 68.

•

Select “V-AUX” as the input source to use Bluetooth

component features in Zone 2. For details about the

Bluetooth component operations, see “Using

Bluetooth^M

components” on page 70.

Set Zone 2 to the standby mode

Press ©ZONE 2 ON/OFF to set Zone 2 to the
standby mode.

Press

©SYSTEM OFF

to set the main zone and Zone 2 to the

standby mode simultaneously.

■ Controlling Zone 2 with the remote

controi

Turning on Zone 2

While holding

down

AMP

IPOWERI

Operating Zone 2

While pressing and holding (DAMP, press one of
the input selector buttons

(

)

to select the

desired input source of Zone 2.

Notes

with same procedure as mentioned above.

Setting Zone 2 to the standby mode

105fn