Resetting the system, Notes, 119en – Yamaha RX-V663 User Manual
Page 123
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the system
Use this feature to reset all the parameters of this unit to the initial factory settings.
Notes
• This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup
menu parameters will not be initialized.
• The initial factory settings are activated next time you turn on this unit.
To cancel the initialization procedure at any time without making any changes, press
©SYSTEM OFF
on the front panel.
1
Press (DSYSTEM OFF on the front panel to
set this unit to the standby mode.
2
Press and hold ®TONE CONTROL and
then press ©MAIN ZONE ON/OFF to turn
on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
TONE CONTROL
While holding
down
3
Rotate the ©PROGRAM selector to select
“INIT”.
4
Press ©TONE CONTROL repeatedly to
select “ALL”.
Select “CANCEL” to cancel the initialization procedure
without making any changes.
5
Press (DSYSTEM OFF to confirm your
selection and set this unit to the standby
mode.
119En