Using the remote eontrol for the scene feature, Hots – Yamaha RX-V663 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the SCENE templates
Using the remote eontrol for the SCENE feature
■ Controlling the input source
components in the SCENE mode
You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 102).
1
Press the desired (DSCENE button on the
remote control.
2
Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
■ Setting input source of the customized
SCENE template on the remote control
If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.
Press and hold the (DSCENE button and the
desired input selector button (
0
) for 3 seconds.
\>/
Press the
(DSCENE
button again to operate the input source
component.
Hots
* These buttons control the input source component. See
page 100 for details of the function of each button.
41
En