Surround left/right speakers sur. l r sp, Front speakers front sp, Center speaker center sp – Yamaha RX-V663 User Manual
Page 90: When the center speaker is large, When the center speaker is small, When you do not use the center speaker, Surround back left/right speakers, Sur.b l/r sp, Select “large” (large), Select “small” (small)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Customizing this unit (MANUAL SETUP)
Measure for the speaker size
The woofer section of a speaker is
- 16 cm (6.5 in) or larger: large
- smaller than 16 cm (6.5 in): small
Surround left/right speakers
SUR. L R SP
Front speakers
FRONT SP
^ ■ '■ ' '
'1
LARGE
Select this setting when the front speakers are
large.
SMALL
Select this setting when the front speakers are
small.
Note
When “LFE/BASS OUT” is set to “FRONT”, you can select only
“LARGE” in “FRONT SP”. If the value of “FRONT SP” is set to
other than “LARGE” in advance, this unit change the value to
“LARGE” automatically.
Center speaker
CENTER SP
When the center speaker is large:
Select “LARGE” (large).
When the center speaker is small:
Select “SMALL” (small).
When you do not use the center speaker:
Select “NONE” (none). The center channel signals are
directed to the front left and right speakers.
Choice
LARGE
Select this setting when the center speaker is
large.
SMALL
Select this setting when the center speaker is
small.
NONE
Select this setting when you do not use the center
speaker. The center channel signals are directed
to the front left and right speakers.
LARGE
Select this setting when the surround speakers
are large.
SMALL
Select this setting when the surround speakers
are small.
NONE
Select this setting when you do not use the
surround speakers. This unit is set to the Virtual
CINEMA DSP mode (see page 51), and “SUR.B
L/R SP” is automatically set to “NONE”.
Surround back left/right speakers
SUR.B L/R SP
Choie*
LRGxl
Select this setting when the single surround back
speaker is large.
LRGx2
Select this setting when the surround back left
and right speakers are Large.
SMLxl
Select this setting when the single surround back
speaker is small.
SMLx2
Select this setting when the surround back left
and right speakers are small.
NONE
Select this setting when you do not use the
surround back speakers. The surround back
channel signals are directed to the surround left
and right speakers.
NoU
If the Dolby TrueHD audio signals are input and “SUR.B L/R
SP” is set to “NONE”, the left and right surround back channels
are not directed to the surround left and right speakers.
86
En