Yamaha RX-V663 - Manual (Page 71)

SIRIUS Satellite Radio^
Before performing the following operations, press @)SIRIUS
on the remote control.
Displaying the SIRIUS Satellite
Radio™ Information
You can display the SIRIUS Satellite Radio information
(such as channel number, channel name, category, artist
name, composer name, or song title) for the currently
selected channel in the front panel display or in the OSD.
Note
If a status message or an error message appears in the front panel
display or in the OSD, see the “SIRIUS Satellite Radio” section
in “Troubleshooting” on page 115 for appropriate remedies.
■ Displaying the SIRIUS Satellite Radio
information in the front panel display
Press ©INFO (or ©INFO) repeatedly to toggle
between the following SIRIUS Satellite Radio
information display modes.
• The front panel display can indicate up to 14 alphanumeric
characters at once. You can set whether to display the SIRIUS
Satellite Radio information in the front panel display in a
continuous manner or by 14 alphanumeric characters at once by
using the “FL SCROLL” parameter in “OPTION MENU” (see
page 96).
• If the SIRIUS Satellite Radio information contains a character
that cannot be recognized by this unit, the character will be
displayed with a space.
• To hold the current SIRIUS Satellite Radio information, press
(D
ENTER on the remote control while it is being displayed.
Press ©ENTER again to release the held information.
• When the antenna of the SiriusConnect tuner cannot receive the
signals, “ACQUIRING” appears in the front panel display.
• When an information is unavailable, “-----------------” appears.
■ Displaying the SIRIUS Satellite Radio
information in the OSD
Press (^DISPLAY on the remote control.
The following screen is displayed in the OSD.
SIRIUS Inforri-ation ANT ¡III- ^
[1]“ ---------ALL CH SEARCH
003¡Big ’80s ----------------
[21™
F': P op
ft! Sanup’ieno --------
[31- /¡Road to India
[41-
l :Frankie Zipper
[ 6 ]
[7]
Back to
“CHANNEL INFO”
[1] Search mode (see page 63)
[2] Channel category
[3] Song title
[4] Composer name
[5] Antenna reception level
[6] Channel number/name
[7] Artist name
' To turn off the OSD, press @ DISPLAY again.
• SIRIUS status messages also appear in the OSD.
You can select the amount of time the SIRIUS Satellite Radio
information is displayed in the OSD by using the “OSD-
SOURCE” parameter in “OPTION MENU” (see page 96).
To hold the SIRIUS Satellite Radio information, press
©ENTER on the remote control while it is being displayed in
the OSD. While this unit is holding the information screen,
“HOLD” appears in the OSD.
The HOLD indicator flashes in the front panel display while
you are holding the SIRIUS information. Press (8) ENTER
again or change the SIRIUS Satellite Radio channel to release
the held information.
67
En