Yamaha DEQ7 - Manual (Page 6)

GENERAL OPERATION
MEMORY CONFIGURATION SELECTING AN EQ PROGRAM
The DEQ7 has a total of 90 internal memory locations. Locations 1
through 30 are READ-ONLY MEMORY containing the 30 preset
EQ programs. These locations cannot be written to or changed .in
any way. The EQ programs contained in memory locations 1
through 30 are:
Mem.
No.
Program Name
Mem.
No.
Program Name
1. GEQ 1/1 oct L=R 16. TONE CONTROL L=R
2. GEQ 1/1 oct L/R 17. TONE CONTROL UR
3. GEQ 1/1 oct L/R N 18. BAND PASS L=R
4. GEQ 2/3 oct L=R 19. BAND PASS UR
5. GEQ 2/3 oct UR 20. BAND PASS UR N
6. GEQ 2/3 oct UR N 21. BAND REJECT L=R
7. GEQ 1/2 oct L=R 22. BAND REJECT UR
8. GEQ 1/2 oct UR 23. 4-PEQ, 6-NOTCH
9. GEQ 1/3 oct Lch 24. 6-NOTCH UR
10. GEQ 1/3 oct Rch 25. DYN. PEQ FC
11. GEQ 1/3 oct Lch N 26. DYN. PEQ LEVEL
12. GEQ 1/3 oct Rch N 27. DYN. PEQ LFO
13. PEQ (4+4) L=R 28. DYN. FILTER FC
14. PEQ (4+4) UR 29. DYN. FILTER LEVEL
15. PEQ + SHELV. UR N 30. DYN. FILTER LFO
A complete description of each effect program and its parameters is
given in “DESCRIPTIONS OF THE PROGRAMS” on page 59.
Locations 31 through 90 are READ/WRITE MEMORY which can
be used to store your own edited versions of the preset programs.
® Press the program selection
A V
key to increment or decre­
ment the memory location number shown on the LED display.
Hold either of these keys down for continuous incrementing or
decrementing. The name of the program corresponding to the
currently selected memory location will be shown on the LCD,
or “*♦** NO DATA ****’’ will be displayed if a memory loca­
tion between 31 and 90 is selected into which an edited EQ
program has not been stored. Note that at this stage the LED
memory number display is flashing, indicating that although a
new location has been selected, its contents have not yet been
recalled.
@ When the desired EQ program has been selected, press the RE­
CALL key. The LED memory number display will stop flashing
and the selected program will be engaged.