Yamaha DEQ7 - Manual (Page 12)

m
Bank Selection
® Press the UmiTY key imtU the МШ1 CONTROL ВАЖ func­
tion appears).
® Select the bank to program using the parameter editing Д and
У keys.
Selected bank
SI
Assigning EQ Programs to MIDI Program Change
Numbers
(D Press the UTILITY key until the MIDI PGM CHANGE function
appears.
© Use the parameter editing ¿\, and y keys to select the program
change number to which a new DEQ7 memory location number
is to be assigned. The range of available program change num­
bers is from 1 to 128.
@ Use the program select /\, and y keys to select the memory
location number containing the effect which is to be assigned to
the currently selected program change number.
@ Repeat steps © and @ until thè desired number of program
change numbers have been programmed.
Hold the UTILITY key down until the UTILITY mode is exited.
MEM number
NOTE: The program number/memory number assignments made
are stored in the BANK selected in the previous MIDI
CONTROL BANK function. To program the program
change/memoiy number assignments for a different
BANK, return to the MIDI CONTROL BANK mode, se­
lect the desired BANK, then parogram the required assign­
ments.
NOTE: BANK D program change assignments are reset to their
initial status when the power is turned OFF.
10